John Guest Stem Elbow - 6mm

• Push-fit 6mm to 6mm stem elbow
• Suitable for use with our 6mm jet hose and Jet Capsules.
• Can be used to convert brush to 'Close Coupled Jet Hose'

Instructions for converting existing brush/jet hose assembly to 'Close Coupled'

1. Remove jet hose from Jet Capsules and insert black stem elbows into each Jet Capsules

2. Place T connector centrally either just above or below brush socket

3. Measure the needed length of the jet hose to fully connect into each stem elbow - cut off excess hose

4. Push-fit jet hose into each stem elbow