4 Way - Close Coupled Jet Hose Assembly
From £9.75
Plus 20% VAT
In stock
- Helps prevent jet hose catching on door handles, bushes, etc.
- Allows for a 'loop free' jet hose assembly
- Jet hose length will need trimming to fit specific brush
Brush Compatibility
- 35-45cm brushes fitted with 2 pairs of jet capsules
If using with a new 'water-through' angle adapter you will need to lengthen the gooseneck hose on the gooseneck - standard size will need 150mm length and long length will need 220mm
Please note this item does not come with a red clip as no longer needed with the Gardiner angle adapters. Red clip can still be bought separately.
(Brush not included)
Fitting Instructions
1.Take the black stem elbows and push fit into Jet Capsules
2. Place T connector centrally either just above or below brush socket with the jet hose connected
3. Measure the needed length of the jet hose to fully connect into each stem elbow - cut off excess hose
4. Push-fit jet hose into each stem elbow
