What WFP equipment will I need for a DIY Set-up?
- 18 Dec 2019
What WFP equipment will I need for a DIY Set-up?
1. FOR AN RO BASED SYSTEM
Below is a typical check list (with links) for a home based RO system including every fitting and fastener:
AT HOME
1000 Litre storage tank - 2nd hand or new
Reverse Osmosis Unit (R.O. Unit)
Submersible Pump (pump water from tank to car)
Length of Transfer hose
Delivery hose shut-off valve
2x large jubilee type clips
IN VEHICLE FOR RUNNING ONE OPERATOR SYSTEM
300 litre tank or other suitable size
1x tank outlet reducing bush to ½” female screw
1x ½” male screw to John Guest 3/8” push fit
Length of 3/8” John Guest tubing to connect to delivery pump
1x 3/8” pump strainer
1x delivery pump
1x pump controller
1x 3/8” stem to ½” John Guest barb fitting
4-5 metres of ½” inch reinforced hose
FROM VEHICLE TO POLE
1x hose reel of choice
100 metre Microbore hose
1x hose reel fitting pack
1x Oetiker O Clip - 11.5mm - 13.5mm
2. FOR A DI-IONISING RESIN BEAD SYSTEM
Below is a typical check list for each system including every fitting and fastener:
IN VEHICLE FOR RUNNING A ONE OPERATOR SYSTEM
300 litre tank or other size
1x tank outlet reducing bush to ½” female screw
1x ½” male screw to John Guest 3/8” push fit
Length of 3/8” John Guest tubing to connect to delivery pump
1x 11 litre DI vessel and John Guest 3/8” fitting kit
1x 25 litre sack of resin
1x 3/8” inline TDS meter
1x 3/8” pump strainer
1x delivery pump
1x pump controller
1x 3/8” stem to ½” John Guest barb fitting
4-5 metres of ½” inch reinforced hose
FROM VEHICLE TO POLE
1x hose reel of choice
100 metre Microbore hose
1x hose reel fitting pack
1x Oetiker O Clip - 11.5mm - 13.5mm