Standard Carbon Fibre Modular Extension Section #10

• Standard Modular Extension #10 can be fitted onto a Super Max 50 or onto the SLX 39 & Super Max 45 with an Extension #9 fitted
• Standard Modular Extension #10 can be fitted onto an Xtreme 44 and Xtreme 47
• We recommend that no more than 4 of these are used with an Xtreme 47 pole
• If wanting to use 4 extensions on an Xtreme 47 then all extensions would need switching to the High-Strength versions
• Do not use 3 of these on an Xtreme 47 pole with the High-Strength versions added to the bottom
• Please note that they may not be fully telescopic if using with a 3K 9 section pole
• Please note that when fitting to a 9 section telescopic pole this section will not fully close up on the pole due to the stepped base part. This also means that the #10 clamp will not meet up with the base of the #9 clamp.

Full Carbon Fibre Extension Section - Featuring the Gardiner Smart Clamps

•     Extension Length = 1.80m
•     Weight  = 510g
•     Handle Diameter = 49mm

Comes with End Cap fitted

Suitable for the SLX, Super Max & Xtreme pole ranges.

If purchasing a single section extension with one of our poles then the standard length hose pack will be sufficient to allow this to be used. If purchasing more than one extension section with a pole then a longer hose pack may need to be purchased separately – please note that this will not be done automatically. Longer length hose-packs can be purchased from this page. Please see chart below to see how much spare hose is supplied as standard with each size pole hosepack.

Pole Hose Pack & Extension Guide