Silver Softwash & Powerwash Pole Adapter - 1/4" to 3/8"
£9.95
Plus 20% VAT
In stock
- Alloy Adapter to fit the #2 section on a Gardiner pole to allow the fitting of pressure washing and soft washing fittings and attachments
- 1/4" BSP Female top screw thread - can have an optional female high pressure coupling attached to allow connection to quick-release nozzles (not supplied by us)
- 3/8" BSP Female base thread - - to allow a threaded male hose end to be fitted
- 76g
- Please note that this adapter should only be used in an open-flow set up - nothing should be fitted above this fitting that can shut the water flow off
- Working Through-Flow Pressure pressure of 4500psi (310 BAR)
- Working Through-Flow Water Temperature of 60°C
- Please note that we cannot offer specific product advice or recommendations on softwash systems, pressure washers, hoses or connections to use for an individual pressure washer set-up
Fitting Instructions
- Remove the #1 section from a Gardiner pole of the needed length
- Slide your high pressure power wash hose with 3/8" Male BSP thread end up the pole and out of the #2 clamp at the top
- Connect the hose end fitting to the base thread on the adapter (recommended to use PTFE tape)
- Push the adapter back in to the #2 clamp and close the clamp lever to hold it in place
- Now screw in the powerwash head attachment with suitable 1/4" male thread connection
- Extend pole to desired height and start pressure or soft washing
Product Questions
Related Products
Be The First To Review This Product