Oetiker Stepless O Clip Clamp 7.8 - 9.5mm - Smaller Pole Hose Size
£0.47
Plus 20% VAT
In stock
- Suitable for use with any combination of Gardiner 5mm barbed fittings & the Gardiner PVC or PU pole hoses, particularly where a tighter fit is needed (not suitable for use with reinforced pole hose)
- This O clamp can be used to clamp down on hose with barb fitting inserted.
- To check suitability for use with other fittings/hoses - measure the OD of the hose with the barb inserted - if it is between 7.8 and 9.5mm then this fitting is suitable to be used
- To operate the clamp use a pair of O Clip Pincers to squeeze the side of the single ear together at the narrow point
- 167 Series Ear Clamp - Stainless Steel
- 360° StepLess - gives uniform compression and surface pressure
- Clamp Ear - compensates for component tolerances, barb size and hose material
- Dimple in Clamp Ear - Increases clamping force
- Burr-free strip edges to reduce material abrasion of hose
- Operating Instruction Sheet
- Video Guide
Size Guide:
|
- For Gardiner All-Season & PU Pole Hose fitted with any 5mm barbed hose fittings - very tight fit |
|
- For all Gardiner PVC & PU Pole Hoses fitted with any 5mm barbed hose fittings |
|
- For Pole Hose fitted with 6mm Barb Fittings and Flexible Reinforced Pole Hose with 5 or 6mm fittings |
|
- For Microbore (6mm ID) |
|
- For Minibore (8mm ID) |
|
- For 1/2" Hose |
Comm./imp. code no. 73269098
Material: Stainless Steel
Product Questions
Be The First To Review This Product