New Version - 16 Micro Jet Rinse Bar - Standard Width 26cm

From £17.50

Plus 20% VAT

Out of stock

  • New Single Piece version with improved internal water flow path
  • 16 micro jets provide precise but gentle rinsing with brush on the glass
  • Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Supreme)
  • Provides over-bristle micro jet rinsing
  • Flow rate is about equivalent to a pair of standard pencil or Fanjets - recommended 1.5 - 2lpm
  • Jet angle is 3° higher than high flow rinsebar to allow for lower flow rates
  • Height of rinse bar can be adjusted
  • Can be used with internal brush jets as well
  • Lightweight at 41g
  • Uses John Guest connections on unit
  • Uses standard Brush T Connector and jet hose - optional extra
  • Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws, if used on Xtreme will need 16mm)
  • Please note: The rinse bar does not come with the brush pictured

Screw Choice:

  1. If using on Ultimate, Super-Lite & Sill Universal brushes then the standard 16mm screws will need replacing with 19mm screws
  2. If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws

6 Month Manufacturing Defect Warranty

Only registered users can write reviews. Please Sign in or create an account