New Version - 22 Micro Jet Rinse Bar - 35cm
From £19.50
Plus 20% VAT
In stock
- New Single Piece version with improved internal water flow path
- 22 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard 35cm Gardiner brush
- If fitting to the Sill Universal brushes it will sit slightly higher and the outer edges will curve out allowing the spray pattern to match the bristle splay - see photos
- Provides over-bristle micro jet rinsing
- Flow rate is about 25% higher than standard pair of 2mm pencil or Fanjets - recommended 1.8 - 2.2lpm
- Height of unit can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 58g
- Uses John Guest connections on unit
- Uses standard Brush T Connector and jet hose - optional extra
- Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws. if used on Xtreme will need 16mm)
- Side locating brackets can be cut off if not needed or desired
- Please note: The rinse bar does not come with the brush & gooseneck pictured
Screw Choice:
- If using on Ultimate, Super-Lite & Sill Universal brushes then the standard 16mm screws will need replacing with 19mm screws
- If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws
6 Month manufacturing defect warranty
Related Products
