Micro Jet Rinse Bar - Standard Width 26cm - High Flow
From £7.00 £17.50
Plus 20% VAT
In stock
- 32 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)
- Provides over-bristle micro jet rinsing
- Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm
- Height of jets can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 41g
- Uses John Guest connections on unit
- Uses standard Brush T Connector and jet hose - optional extra
- Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws. if used on Xtreme will need 16mm)
- Please note: The rinse bar does not come with the brush & gooseneck pictured
Screw Choice:
- If using on Ultimate, Super-Lite & Universal brushes then the standard 16mm screws will need replacing with 19mm screws
- If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws
6 Month Manufacturing Defect Warranty
Be The First To Review This Product