What WFP equipment will I need for a DIY Set-up?

 

1.  FOR AN RO BASED SYSTEM

Below is a typical check list (with links) for a home based RO system including every fitting and fastener:

 

AT HOME

1000 lItre storage tank - 2nd hand or new

Reverse Osmosis Unit (R.O. Unit)

Submersible Pump (pump water from tank to car)

Length of Transfer hose

Delivery hose shut-off valve

2x large jubilee type clips

 

IN VEHICLE FOR RUNNING ONE OPERATOR SYSTEM

300 litre tank or other suitable size

1x tank outlet reducing bush to ½” female screw

1x ½” male screw to John Guest 3/8” push fit

Length of 3/8” John Guest tubing to connect to delivery pump

1x 3/8” pump strainer

1x delivery pump

1x pump controller

1x 3/8” stem to ½” John Guest barb fitting

4-5 metres of ½” inch reinforced hose

1x 12-20mm jubilee type clips

1x Hozelock endstops

 

FROM VEHICLE TO POLE

1x hose reel of choice

100 metre Microbore hose

1x hose reel fitting pack

1x inner Ring O Clip Hose Clamp Stainless Steel - 11.5mm - 13.5mm

1x EZ Snap 6mm Endstop

 

 

2.  FOR A DI-IONISING RESIN BEAD SYSTEM

Below is a typical check list for each system including every fitting and fastener:

 

IN VEHICLE FOR RUNNING A ONE OPERATOR SYSTEM

300 litre tank or other size

1x tank outlet reducing bush to ½” female screw

1x ½” male screw to John Guest 3/8” push fit

Length of 3/8” John Guest tubing to connect to delivery pump

1x 11 litre DI vessel and John Guest 3/8” fitting kit

1x 25 litre sack of resin

1x 3/8” inline TDS meter

1x 3/8” pump strainer

1x delivery pump

1x pump controller

1x 3/8” stem to ½” John Guest barb fitting

4-5 metres of ½” inch reinforced hose

1x 12-20mm jubilee type clips

1x Hozelock endstops

 

FROM VEHICLE TO POLE

1x hose reel of choice

100 metre Microbore hose

1x hose reel fitting pack

1x inner Ring O Clip Hose Clamp Stainless Steel - 11.5mm - 13.5mm

1x EZ Snap 6mm Endstop