What's New


Micro Jet Rinse Bar - Standard Width 26cm


plus 20% VAT

Price as configured: £26.50

plus 20% VAT

In stock

  • 32 micro jets provide precise but gentle rinsing with brush on the glass

  • Fits between brush and brush socket on any standard width (26cm) Gardiner brush (not the Sill brush or Supreme)

  • Provides over-bristle micro jet rinsing

  • Needs a higher flow rate than standard pencil or Fanjets - recommended 2.5lpm - 3lpm

  • Height of jets can be adjusted

  • Can be used with internal brush jets as well

  • Lightweight at 41g

  • Uses John Guest connections on unit

  • Uses standard Brush T Connector and jet hose - optional extra

  • Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws)

  • Please note: The rinse bar does not come with the brush & gooseneck pictured

* Required Fields



Screw Choice:

  1. If using on Ultimate, Super-Lite, Universal, & Supreme then the standard 16mm screws will need replacing with 19mm screws
  2. If using on Xtreme brushes then the standard 13mm screws will need replacing with 16mm screws

Ask a Question

Contact Information

* Required Fields

Be the first to review this product

Write Your Own Review

You're reviewing: Micro Jet Rinse Bar - Standard Width 26cm