35cm Rinse Bar - 22 Micro Jets
From £19.50
Plus 20% VAT
In stock
- New Single Piece version with improved internal water flow path
- 22 micro jets provide precise but gentle rinsing with brush on the glass
- Fits between brush and brush socket on any standard 35cm Gardiner brush
- If fitting to the Sill Universal brushes it will sit slightly higher and the outer edges will curve out allowing the spray pattern to match the bristle splay - see photos
- Provides over-bristle micro jet rinsing
- Flow rate is about 25% higher than standard pair of 2mm pencil or Fanjets - recommended 1.8 - 2.2lpm
- Height of unit can be adjusted
- Can be used with internal brush jets as well
- Lightweight at 58g
- Uses John Guest connections on unit
- Uses standard Brush T Connector and jet hose - optional extra
- Side locating brackets can be cut off if not needed or desired
- Please note: The rinse bar does not come with the brush & gooseneck pictured
Screw Choice:
- If using on Ultimate, Super-Lite & Sill brushes then the standard 16mm screws can continue to be used
- If using on Xtreme brushes then the Xtreme 13mm screws will need replacing with 16mm screws
- If using a brush with brush bumper fitted then the back edge of the brush bumper will need lifting out of the way to allow the rinse bar to fit against the brush tight
6 Month manufacturing defect warranty
Product Questions
Related Products
