Pole Fittings

Videos

Gritstop® - Pole Hose Cleaning Attachment

£8.95

plus 20% VAT

Price as configured: £8.95

plus 20% VAT

In stock


  • Gardiner are pleased to be appointed as sole distributors of the new Gritstop® device

  • Keeps the inside of the pole dirt and grit free

  • Reduces dirt and wear on the pole during its life

  • Easily fits any Gardiner pole inside of the base cap and cleans the PU pole hose during use

  • Please note that this only works with our Orange PU hose or similar PU hose

  • Pack comes with Gritstop device and 5 Gritstop washers

  • We recommend changing the washer on a weekly schedule for maximum efficiency

* Required Fields

Description

Details

  • Gardiner are pleased to be appointed as sole distributors of the new Gritstop® device
  • Keeps the inside of the pole dirt and grit free
  • Reduces dirt and wear on the pole during its life
  • Easily fits any Gardiner pole inside of the base cap and cleans the PU pole hose during use
  • Please note that this works best with our Orange PU hose or similar
  • Our Green PU hose will work, but not quite as smoothly as the stiffer Orange PU
  • Pack comes with Gritstop device and 5 Gritstop washers
  • We recommend changing the washer on a weekly schedule for maximum efficiency

Gritstop Pack Comprises:

  • 2 piece Gritstop Device
  • 5 Gritstop washers

Fitting Instructions

  1. Remove gooseneck from the top of the pole - disconnect the pole hose and pull out from base of hole
  2. Remove end cap from the pole
  3. Place 1 washer inside of the two pieces of the Gritstop device and push together
  4. Place the device on the base of the pole with the small diameter shaft going up inside the base of the pole first
  5. Replace the end cap on the pole
  6. If not already using Orange PU hose on the pole then switch pole hose to Orange PU hose
  7. If the PU pole hose has a top stem to barb connector fitted cut this off leaving just the PU hose end
  8. Re-fit the hose by pushing it up the end cap and through the Gritstop washer
  9. Connect the pole hose back up to the gooseneck connector & refit the gooseneck to the pole
  10. You are now ready to work
  11. We recommend renewing the washer every 5-7 working days

Ask a Question

Contact Information

* Required Fields

Related Products

Be the first to review this product

Write Your Own Review