Complete RO Systems

Videos

PRF RO - Reverse Osmosis Unit

£339.00

plus 20% VAT

In stock


  • Designed to meet the requirements for smaller, more robust RO systems

  • Exceptional ease of use and good value for money RO

  • Optimum Input Water Pressure range is 50psi (3.4 bar) - 80psi (5.5bar)

  • Nominal 720gpd rating - Real world operation would provide 1000 -1700 litres per 24 hour day on average input pressure of 70psi

Description

Details

The PRF-RO, the replacement to the Merlin RO system, has been designed to meet the requirements for smaller, more robust RO systems.

The PRF-RO incorporates two high flow membrane elements in series to produce an average of 1.9 lpm of purified water, protected by a carbon impregnated Fibredyne pre-filter delivering a capacity of 38,000 litres.

  • Up to 2,600 litres per day of on-demand purified water in ideal conditions (summer temperature input water and 80 psi pressure)
  • Real world operation would provide 1000 -1700 litres per 24 hour day on average input pressure of 70psi
  • Works on mains pressure from just 50psi (3.2 bar) - Best performance is achieved when mains pressure is 80psi (5.5bar)
  • Average rejection rate - 93% @ 80psi (5.5 bar) - If input TDS is 200ppm then at 80psi the output TDS would be about 15ppm
  • Rejection rate will drop if pressure is lower than 80 psi (5.5 bar) - see technical sheet for more details
  • Average waste water ratio is 3:1 when used as standard unit
  • Auto shut-off if using a float valve
  • Please note that this unit does not come with any feed tubing - this will need to be bought separately
  • Dry Weight 9.5kg
  • For lower pressure and/or low temperature applications a booster pump is recommended
  • Please CLICK HERE to see the technical sheet for this product

Technical Info

Pentair PRF-RO - Reverse Osmosis System

  • Inlet has 1/2" John Guest connection
  • Waste and product outlets have 3/8" John Guest connections
  • Please note that this unit comes as a complete kit and will need very simple assembly - see video guide
  • Please note that this unit does not come with any feed tubing - this will need to be bought separately
  • Only use John Guest type tubing to supply the feed to the unit and ideally should be no longer than 1-2m from the mains tap to maintain optimum pressure
  • Please CLICK HERE to see the technical sheet for this product

Ask a Question

Contact Information

* Required Fields

Be the first to review this product

Write Your Own Review